The IPL nanometer Beauty Apparatus has Advanced Blue and Red IPL (Intense Pulsed Light) to enhance the look of skin affected by conditions such as poor skin texture, uneven pigmentation, and sun damage.
Turns water based skincare products into nano droplets (extremely small, at less than 100 nm), a moisturizing mist capable of deeply penetrating the outer layers of your skin.
Helps in the fight with acne and dermatitis.
Lightweight and portable.
Elegant design for your night table or purse.
Mist Spray Function: Adapts digital technology and nano technology to nanoparticalize water-based skin care products, to a diameter within 0.312-0.625 microns, so the product can infiltrate into the deep skin layers fast, allowing skin to absorb it better.
The normal water content of the skin's epidermis is 10%-20%. If the water content gets lower than 10%, the skin will become dry and wrinkled. Direct spraying of nanoparticalized mist can increase the water content of outer cells and make the skin look more moist and elastic.
When the face is exposed to the nano mist, the epidermal cells of the skin will expand and become softer as the droplets penetrate. That makes it easier to clean aging skin, and makes the skin more air permeable and able to absorb skin care products.
Plenty of nano mist makes the pores open. Nano-sized drops of the mist can penetrate into the skin easily, to loosen and clean the dirt, old skin deposits and excessive oil deep in pores and deeper skin layers. Then the skin can breathe freely.
Blue Light (415nm)
The Red and Blue LED light produced by the IPL Nanometer beauty device has the same specifications as the light used in professional beauty treatment devices. The Blue Light has a unique low-intensity blue light wavelength that appears to activate the bacteria-fighting militia called porphyrins, which ultimately kill acne bacteria.
Red Light (630nm)
The red light at this wavelength is also beneficial for skin and is often provided along with the blue light to enhance the acne treatment, appearing to speed up the process significantly. The IPL Nanometer uses the low power of natural red light to deliver a totally natural method of skin rejuvenation.
Nanometer (Spray) Beauty Apparatus Components:
1. Head Cover
2. Spray Nozzle
3. LED
4. Power (also selects Blue/Red)
5. Pipette
6. Water Container
7. Battery Case
For Skin Care Products (water based skin care serum or essence only)
1.
Remove the water container lid and use the pipette to transfer the skin care product into the container. Water based products include distilled water, clear solutions of completely water-soluble essences, but not colloids (gels, gums, oil-in-water emulsions, etc.)
2.
Close the water container lid. If necessary, use a piece of tissue paper to wipe off the residue.
3.
Open the head cover, then press the power button to begin spraying.
For Light Therapy
1.
Open the head cover. The blue LED will light up.
2.
To switch to the red LED, press the power button again (note sprayer will activate in unison with red LED).
3.
After use, press the power button to turn off.
Tips
1.
The droplets sprayed out by action of the particle diffuser are the tiniest particles with energetic motion; thus the best effect can be gained by spraying within 15-20 cm.
2.
Spraying twice a day is recommended, morning and night.
Fades the look of Brown Spots And Areas of Hyperpigmentation.
(Targeting loose skin below the mouth and chin, fine lines and flabby double chin).
Position the metal electrodes firmly toward the front of the chin just below the jaw line. Stimulate while applying an upward push.
Continue stimulation for three minutes.
(Targeting the skin around the side of the neck and jaw, jaw line that has lost its original firmness).
Position the metal electrode firmly underneath the jawbone following the angle of the jaw, while applying an upward push.
Continue stimulation for three minutes..
(Targeting fine lines and loosened muscles around the mouth and lower cheek).
Position the metal electrodes firmly against the top of the back of the jawbone, following the angle of the jaw. Do not allow the metal contacts to drift towards the cheek or the neck.
Continue stimulation for three minutes.
(Targeting fine lines and loosened muscles around the cheek, nose and upper lip, dull skin).
Position the metal electrodes firmly and vertically against the upper corner of the jawbone adjacent to the ear.
Continue stimulation for three minutes.
(Targeting fine lines, contours of the eye and eyebrow).
Position the metal electrodes firmly and vertically against the upper cheekbone adjacent to the ear. Make sure that the upper metal contact is above the ear passage.
Continue stimulation for three minutes.
(Targeting appearance of the facial contours produced by the muscles around the cheek, jaw, chin and corner of the mouth).
Position the metal electrodes firmly below the cheekbone, aligned between the ear and the corner of the mouth. The device should be held vertically below the cheekbone
(Targeting the appearance of the entire neck area; skin tightness and muscle-tone from the chin to the base of the neck).
Position the metal electrodes firmly towards the side of the neck between the large diagonal muscle and the windpipe.
View My Cart
