3 ZONE LOW VOLTAGE FULL-ENCLOSURE INFRARED SAUNA WRAP
FIR WRAP THERMAL SAUNA PH2B III, PROFESSIONAL OR HOME SAUNA USE
The Infrared Sauna Wrap PH-2BIII is a low-voltage FIR device, with 3 separately controlled heating zones, suitable for professional use at a spa, weight loss center or beauty salon. Sturdy and made for frequent operation. Provides a complete sauna experience. The Infrared Sauna Wrap is also portable and easy to clean, for travel or home use. The Direct heat from the blanket allows for gentle radiant relaxation of the muscles and controlled perspiration.
INFRARED SAUNA WRAP PH-2BIII USER MANUAL
INFRARED SAUNA WRAP PH-2BIII COMPOSITION AND FUNCTIONS:
Control Box:
adjusts and controls the temperature and timer settings of the blanket.
Thermal Blanket:
conducts heating to the body. Made of Nylon,with Space Carbon Fiber heating elements, covered by a layer of PU (polyurethane) fabric
Power Cord:
supplies main power to the control box.
Connection Leads (3):
mounted on the end of the blanket, connect the thermal blanket to the control box.
PANEL DISPLAY AND FUNCTIONS OF THE KEYS:
The Infrared Sauna Wrap PH-2BIII is composed of a control box, a thermal blanket, a main power lead and 3 connection leads.
The control box keeps a memory of the last settings used
ON/OFF
Switch the system 'ON' or 'OFF'
Channel Key
Select the respective body zones (1-2-3). One or more zones can be targeted in a sauna session.
Temperature Key ()
Press to increase or press to decrease the temperature, 1 °C for each time pressed.
Timer Key ( )
Press to increase or press to decrease the time, 5 minutes for each time pressed.
Overload Display
Overload indicator lights when the power surpasses 300W, and the alarm buzzer will sound.
Start/Stop Key
Press Start/Stop key to start or stop the device after setting the temperature and timer.
INFRARED SAUNA WRAP PH-2BIII INSTRUCTIONS:
1.
Place the Infrared Sauna Wrap on a flat surface, such as the bed or floor.
2.
Wrap your body in the blanket. If a massage or body oil is used, then it is recommended to first wrap the body in a plastic film or sheet to protect the thermal blanket.
3.
Put the control box on a flat surface such as a table and insert the plug into the main power socket.
4.
Connect the 3 connection leads between the thermal blanket and the control box. Make sure that lead ‘1’ is connected to jack ‘1’, lead ‘2’ to jack ‘2’, etc. or the thermal blanket will not work.
5.
Turn the main power switch on at the back of the control box. The red ‘Power’ indicator on the control panel will light. The device has not started working yet.
6.
Press the ‘ON/OFF’ key to start setting the temperature and the timer. The Channel key shows ‘1’ (body zone 1).
7.
Press ‘Timer ’ to set the working time. For each time pressed, the time will increase or decrease by 5 minutes.
8.
Press ‘Temperature ’ to set the working temperature. For each time pressed, the temperature will increase or decrease by 1° Centigrade. Set the temperature to your specific requirements.
9.
Then press ‘Heating Zone’ key to change the zones. Repeat steps 6, 7, and 8 to set and start body zones 2 and 3.
Zone 1: Upper body and limbs (suggested temperature 38° C) Zone 2: Mid body (suggested temperature 44° C) Zone 3: Lower body and limbs (suggested temperature 42° C)
10.
Press ‘Start/Stop’ key. The green indicator will light, showing that heating has started.
11.
When the heating timer counts down to ‘0’, a signal will sound three times and the digital timer will display ‘0’ showing the heating has finished.
12.
After using, pull the plug out from the power source.
13.
If at any time you need to stop the session, just press the ‘Start/Stop’ key. When the green indicator goes off, the system has stopped working.
14.
Wipe the sweat from the surface of the thermal blanket with a wet towel and dry it by laying it flat on a bed or table for more than 1 hour.
15.
Fold the blanket and store it in a dry and cool place.
16.
For professional use at spa, weight loss center or beauty salon, wipe surface of the thermal blanket as above, and leave an interval between usage of at least 1/2 hour, preferably 1 hour.
SUGGESTED USE:
1.
When the room temperature is lower than 20°C you may preheat the blanket for 10 minutes prior to use.
2.
It is suggested that you be well hydrated by drinking a glass of water prior to using.
Affordable Price Our Infrared Body Wrap series are powered to deliver infrared heating similar to the advanced "Formostar" devices which are priced at from $7000 to $10,000 U.S.
4 Separate Heating Zones Select the respective body zones (1-2-3-4).
1, 2 (Arms), 3,4 (Legs, Body).
Space Carbon Fiber
Made of Nylon, covered by a layer of PU (polyurethane) fabric, with heating elements of Space Carbon Fiber.
You Compare! Slim Body Wrap System √ 4 separately controlled areas (upper / lower X 2 sides) √ usually all used at once √ all Far Infrared Benefits √ use anywhere - can be owned and kept at home Formostar √ 6 separate controls - thighs (2), hips, stomach or chest, small-area (2) √ usually all used at once √ all Far Infrared Benefits √ usually at spas/salons by the hour due to cost
Safety and Efficiency are the key answers to the question "Why Low Voltage?" In this design, a A step-down transformer sends a low-voltage current (no more than 36 Volts) through the space carbon fiber heating element, whose resistance produces enough radiant heat to safely warm the body to a pleasant temperature determined by you.
Safe
So safe, in fact that nails, water, and even touching the heating element during operation will have no harmful effect! You will have peace of mind as the systems are tested to UL standards and run on worry-free, low-voltage energy. In theory, even if the outer fabric were removed, you could connect the space carbon fiber heating element, turn it on, and walk directly on top of it, and not receive a shock, even if you were soaking wet.
Efficient
Radiant heat is the most efficient form of heat available. Low-voltage radiant heat is between 97% and 100% efficient in converting electric power to heat. Other electrical heating approaches can be up to 40% less efficient. Significantly less operating time is required to maintain the desired warmth, keeping operational costs to a minimal.
)
View My Cart
