USE ON ABDOMEN, HIPS, THIGHS, WAIST, BACK, ARMS
INFRARED BODY SHAPER, INFRARED HEATING THERAPY
The INFRA SPA Sauna Belt ANP56G is our top-of-the-line belt, featuring low-voltage operation and digital temperature and time controls (up to 95 minutes). At 48 inches (end to end) it is also the longest of our belts, with a continuous 9-inch width.
Low-voltage operation means the greatest efficiency in producing Far Infrared Radiant heat, and it is safe even from accidental contact with fingernails or water.
Like our other highest quality products, the INFRA SPA Sauna Belt ANP56G has solid, one-piece construction, of nylon and space carbon fiber. Its size ensures ample coverage and a comfortable fit for any wearer. The improved digital controls are operated by a microprocessor, housed in a sturdy, stand-alone control box.
-
Good adjunct to weight loss program
-
Muscle Strain
-
Bulging or Herniated Disc
-
Spinal Stenosis
-
Sacroiliac Joint Inflammation
-
Muscle Spasms
-
Degenerative Disc Disease
-
Sciatica or Pinched Nerve Sciatica
LOW-VOLTAGE INFRA SPA SAUNA BELT ANP-56G FEATURES:
•
Powered by low volt DC ( 36 V ), safe and reliable.
•
Precise temperature and time control operated by microprocessor system.
•
Made of UL approved and durable space carbon fiber.
•
Combining traditional massage with high - efficiency FIR wave heating technology.
INFRA SPA SAUNA BELT ANP-56G CONTROL BOX:
ON / OFF key:
Press ON / OFF to switch on or off the power.
Temperature key:
Press '+' key to increase and press '-' key to decrease the temperature, 1°C each time pressed. The temperature ranges from 30 °C to 60 °C. The default temperature is 50 °C.
Timer key:
Press '+' key one time to increase 5 minutes or '- ' key to decrease 5 minutes each time pressed. The time ranges from 5 to 95 minutes. The default time is 30 minutes.
Start / Stop key:
Press Start / Stop key to start the device after setting the time and temperature.
Working indicator (green):
The indicator light will be on when the device is working; It will be off when the device is not working.
Power indicator (red ):
The indicator light will be on when the power is on.
HOW TO USE THE INFRA SPA SAUNA BELT ANP-56G:
1.
Plug the four-core pin of the Sauna Belt into the socket at the front of the controller box. Then screw it tight. Please note that the pin can only be put into the socket when the concave slot on the pins and the protruding poles on the socket are aligned.
2.
Wrap the belt around the belly or chosen body part.
3.
If a massage or body oil is used, first wrap the body part in a plastic film or sheet to protect the Sauna Belt.
4.
Switch on the power switch at the back of the controller box and then press ON / OFF key to supply power to the device.
5.
Press Timer key and Temperature key on the panel to set time and temperature and then press START / STOP key to start heating.
6.
Default time (30 minutes) and default temperature ( 50°C ) is suggested in normal cases.
7.
When the session is completed, please press ON / OFF key on the panel again to stop the device and then switch off the power switch at the back of the controller box.
INFRA SPA SAUNA BELT ANP-56G TECHNICAL SPECIFICATIONS:
Voltage
DC 36V (LOW VOLTAGE)
Materials
Made of Nylon, covered by a layer of PU (polyurethane) fabric, with heating elements of carbon fiber
Dimensions (End to End)
48” X9” / 122 x 23 cm
Temperature
30°C - 60 °C / 86°F~140°F(Actual temperature may vary when in use)
Safety and Efficiency are the key answers to the question "Why Low Voltage?" In this design, a A step-down transformer sends a low-voltage current (no more than 36 Volts) through the space carbon fiber heating element, whose resistance produces enough radiant heat to safely warm the body to a pleasant temperature determined by you.
Safe
So safe, in fact that nails, water, and even touching the heating element during operation will have no harmful effect! You will have peace of mind as the systems are tested to UL standards and run on worry-free, low-voltage energy. In theory, even if the outer fabric were removed, you could connect the space carbon fiber heating element, turn it on, and walk directly on top of it, and not receive a shock, even if you were soaking wet.
Efficient
Radiant heat is the most efficient form of heat available. Low-voltage radiant heat is between 97% and 100% efficient in converting electric power to heat. Other electrical heating approaches can be up to 40% less efficient. Significantly less operating time is required to maintain the desired warmth, keeping operational costs to a minimum.
View My Cart
