USE ON ABDOMEN, HIPS, THIGHS, WAIST, BACK, ARMS
INFRARED BODY SHAPER, INFRARED HEATING THERAPY
The INFRA SPA Sauna Belt ANP1DS adds digital temperature and time (0-90 mins.) controls and Space Carbon fiber construction. But it remains extremely affordable. The improved digital controls for the INFRA SPA Sauna Belt ANP1DS are housed in a cleanly-designed and easy-to-use control panel.
The sleek one-piece belt, of nylon and space carbon fiber, features strong stitching for durability, and a comfortable, easy fit for any wearer. Meets the high standards of quality of our sauna belts, with their superior materials and sturdy design.
DIGITAL INFRA SPA SAUNA BELT ANP-1DS FEATURES:
HOW TO USE THE INFRA SPA SAUNA BELT ANP-1DS:
1.
Wrap the belt around the belly or chosen body part.If a massage or body oil is used, you need to first wrap the body part with a plastic sheet to protect the Sauna Belt.
IMPORTANT: Wear belt a little loose, and never doubled-up. See below.
Next insert the plug into the main power socket.
2.
Press the 'Mode' button to select Temperature Adjustment Function. The 'Temp' indicator will light. Press ' ' to increase or ' ' to decrease the temperature, 1 grade for each time pressed. The temperature has 3 grades ranging from 45 °C ~ 50°C. The default temperature is grade 2.
Press the 'Mode' button to select Time Adjustment Function. The 'Time' indicator will light.Press ' ' to increase or ' ' to decrease the time, 15 minutes for each time pressed (0~90 minutes). The default time is 60 minutes.
3.
Press the 'Start' button to start heating.
After use, disconnect the plug from the main power socket.
•
30~35°C to soothe, stimulate, relax
•
35~40°C for pain relief & muscle relaxation
•
40~50°C for physical therapy (inflammation of joints)
•
50~60°C for slimming (sweating)
IMPORTANT:
1. Wear the belt a little loose. A tight belt can overheat the skin.
2. Never allow the belt to double-up or scrunch up. Doubled-up belt fabric can cause extreme overheating and damage to the belt. Avoid tightness of belt or body positions that can fold the belt over.
INFRA SPA SAUNA BELT ANP-1DS TECHNICAL SPECIFICATIONS:
Voltage
AC100 -120V 60W / 220-240 V 60W
Materials
Made of Nylon, covered by a layer of PU (polyurethane) fabric, with heating element of carbon fiber
Dimensions (End to End)
Width x Length : 20 x 124 (cm) / 8 x 48.8 (inches) Heating Area: 60 cm / 24 inches
Temperature
45°C ~ 50 °C / 113°F~122°F* (Actual temperature may vary when in use)
Net Weight
375 g / 0.82 lb
The Sauna Belt is only to provide dry heat therapy for body surfaces.
It is not intended to diagnose, treat, cure or prevent any disease. If you are uncertain whether you can use this product, please consult your physician before using.
Safety and Efficiency are the key answers to the question "Why Low Voltage?" In this design, a A step-down transformer sends a low-voltage current (no more than 36 Volts) through the space carbon fiber heating element, whose resistance produces enough radiant heat to safely warm the body to a pleasant temperature determined by you.
Safe
So safe, in fact that nails, water, and even touching the heating element during operation will have no harmful effect! You will have peace of mind as the systems are tested to UL standards and run on worry-free, low-voltage energy. In theory, even if the outer fabric were removed, you could connect the space carbon fiber heating element, turn it on, and walk directly on top of it, and not receive a shock, even if you were soaking wet.
Efficient
Radiant heat is the most efficient form of heat available. Low-voltage radiant heat is between 97% and 100% efficient in converting electric power to heat. Other electrical heating approaches can be up to 40% less efficient. Significantly less operating time is required to maintain the desired warmth, keeping operational costs to a minimum.
' to increase or ' 
' to decrease the temperature, 1 grade for each time pressed. The temperature has 3 grades ranging from 45 °C ~ 50°C. The default temperature is grade 2.
View My Cart
