A Face and Body Beauty Massager that delivers vibrating and warming massages at different intensities to local areas of the skin, as well as natural and refreshing negative ions, to promote toning and beautify skin appearance.
(Negative Ions also occur naturally, for example in ocean waves and lightning storms, and have refreshing properties.)
1.
NEGATIVE ION RELEASE
The ionizing function of Beauti Tron employs high-voltage, low-current electronics.
2.
ACTIVATING WARMTH
Built-in Warmer, can activate muscular and skin cells to enhance effects of treatments.
3.
VIBRATING MASSAGE
Built-in 3 level vibrating mode. Massages deep skin layers, muscles as well as the lymph system of face and body, for a more youthful appearance.
4.
TREATMENT BUILT-IN PROGRAM
With practical and user-friendly treatment programs, user can quickly develop customized parameters and select the built-in program that works most effectively for him/her.
BEAUTI TRON ES-350 FEATURES:
Beauti Tron applies its power to the largest areas/ lets you focus in on small areas of problem skin to tighten/cleanse/lift/nourish:
• Front of probe for small areas of the body
• Longest part of probe for cheeks, brows, or wider areas of the body
• Tip for small areas, such as eye corners and nose
• Corner of probe for reaching areas like between eyes, bridge of nose
HOW TO USE BEAUTI TRON ES-350:
CLEANSING MODE:
To clean the residual cosmetics, dirt and aging skin cells that cannot be removed by washing alone.
1.
Press "M" to choose Cleansing Mode.
2.
Press "Level" button to choose suitable Intensity. For facial use, the maximum intensity is at the 3rd level.
3.
Suggested time of use 5-10 minutes.
4.
Press "Start" button to start.
MASSAGE MODE:
To Massage muscular tissue and deeper layers, revitalize the look of the skin.
1.
Press "M" to choose Massage Mode.
2.
Press "Level" button to choose suitable Intensity.
3.
Suggested time of use 5-10 minutes.
4.
Press "Start" button to start.
NUTRIENT MODE:
Massage skincare products into deeper into skin and allow skin to absorb effectively.
1.
Press "M" to choose Nutrient Mode.
2.
Press "Level" button to choose suitable Intensity.
3.
Suggested time of use 5-10 minutes.
4.
Press "Start" button to start.
LIFT MODE:
To stimulate skin tissue for a firmer looking skin.
1.
Press "M" to choose Lift Mode.
2.
Press "Level" button to choose suitable Intensity.
3.
Suggested time of use 5-10 minutes.
4.
Press "Start" button to start.
BEAUTI TRON TECHNICAL SPECIFICATIONS:
PRODUCT SPECIFICATIONS
Size
Width x Length x Height: 25 x 85 x 35 (mm) / 1" x 3.4 x 1.4"
AC Input
110V-240V (60/50Hz)
Weight
0.4 kg
Power Consumption
30W
BEAUTI TRON OPERATING SPECIFICATIONS
Operating Modes
8 modes (Basic: 4, Intelligent: 4)
Ionizing Voltage
5 levels (4V-10V)
Temperature
5 levels (38°C - 46°C )
Vibration
3 levels (weak-middle-strong )
Time Adjustment
20 min (AUTO-OFF)
Note: After each 5 minutes of use, the device will emit a “beep” sound, once only.
Fades the look of Brown Spots And Areas of Hyperpigmentation.
(Targeting loose skin below the mouth and chin, fine lines and flabby double chin).
Position the metal electrodes firmly toward the front of the chin just below the jaw line. Stimulate while applying an upward push.
Continue stimulation for three minutes.
(Targeting the skin around the side of the neck and jaw, jaw line that has lost its original firmness).
Position the metal electrode firmly underneath the jawbone following the angle of the jaw, while applying an upward push.
Continue stimulation for three minutes..
(Targeting fine lines and loosened muscles around the mouth and lower cheek).
Position the metal electrodes firmly against the top of the back of the jawbone, following the angle of the jaw. Do not allow the metal contacts to drift towards the cheek or the neck.
Continue stimulation for three minutes.
(Targeting fine lines and loosened muscles around the cheek, nose and upper lip, dull skin).
Position the metal electrodes firmly and vertically against the upper corner of the jawbone adjacent to the ear.
Continue stimulation for three minutes.
(Targeting fine lines, contours of the eye and eyebrow).
Position the metal electrodes firmly and vertically against the upper cheekbone adjacent to the ear. Make sure that the upper metal contact is above the ear passage.
Continue stimulation for three minutes.
(Targeting appearance of the facial contours produced by the muscles around the cheek, jaw, chin and corner of the mouth).
Position the metal electrodes firmly below the cheekbone, aligned between the ear and the corner of the mouth. The device should be held vertically below the cheekbone
(Targeting the appearance of the entire neck area; skin tightness and muscle-tone from the chin to the base of the neck).
Position the metal electrodes firmly towards the side of the neck between the large diagonal muscle and the windpipe.
View My Cart
