A BREAKTHROUGH APPROACH TO POST-SURGICAL PAIN: TARGETED RELIEF, FASTER RECOVERIES, BETTER OUTCOMES.
Here you will find the VitalWrap System (Model 00002, which includes VitalWrap System control unit, the tubing set, and a standard VitalWrap thermal fabric wrap)
The VitalWrap System consists of three components: a control unit, a tubing set, and a thermal fabric wrap. The control unit, with its fluid reservoir, manages the temperature of water used by the system to supply heat or cold to the fabric wrap attached to the body. By pumping the water through a heat-exchanging bladder inside the wrap, the control unit warms or cools the water to match the proper temperature setting, delivering precise and safe thermal therapy.
Below you will find the different VitalWraps available for different parts of the body when using your VitalWrap System.
VITAL WRAP SYSTEM FEATURES:
HOW TO USE THE VITAL WRAP SYSTEM:
1.
Open it Up: Rotate the handle down to unlock and remove the Top Assembly. Take it Off: Remove the Top Assembly and place it down carefully on a counter top so that the Fluid Canister can be filled.
2.
Take it off: Remove the RED caps on the dip tubes.
3.
Fill it Up: Fill Fluid Canister with ice and water to a level above the line marked minimum fill, but do not fill above the line marked maximum fill.
4.
Cover it Up: Place the Top Assembly on the Fluid Canister. Rotate the Top Assembly so that it aligns and seats in the Fluid Canister notch. Then, raise the Handle to lock the Top Assembly onto the Fluid Canister.
5.
Connect Them: Connect the Tubeset to the Fluid Connector located on the Top Assembly. Align the Orientation Dots as shown. Press BOTH buttons on the tubeset connector to connect & disconnect.
6.
Power it Up: Plug the electrical cord into the DC Appliance Jack located on the Top Assembly and connect the appliance to the electrical source.
AVAILABLE VITALWRAPS FOR YOUR VITALWRAP SYSTEM
VIT-00001
Standard VitalWrap, 6x60” size
VIT-00397
Medium Knee VitalWrap
VIT-00255
Medium VitalWrap,
4-1/4x53” size
VIT-00398
Ankle VitalWrap
VIT-00118
Large VitalWrap, 8x72” size
VIT-00394
Wrist VitalWrap
VIT-00119
Medium ShoulderVitalWrap
VIT-00001
Standard VitalWrap, 6x60” size
VIT-00122
Cervical VitalWrap
VIT-00396
Dual Hand VitalWrap
VIT-00392
Large Knee VitalWrap
VIT-00001
Assembly, VitalWrap, 6x60” width
PERSONAL TESTIMONIALS
The VitalWear System provides us at STAR Physical Therapy the unique advantage of applying either heat or cold therapy in conjunction with mild compression. Patients report improved comfort and joint mobility. We observe reduced swelling and inflammation.
Richard A. Eagleston, P.T., A.T.C. STAR Physical Therapy
Redwood City, California
The VitalWrap System is a great invention! In a comparative sense, I was pain free for the first week following rotator cuff surgery. By the end of the first week, I no longer needed the use of the VitalWrap. Paul A. Covey
Stockton, CA
It works great and very helpful. Takes the back pain away. I’ve told several people about this great product. Thank you. Thomas L. Goold
Twain Harte, CA
This is a great machine and it gets down into the muscle that gives you relief. I would recommend this to anyone suffering from chronic pain. Nora Keene
Tuscaloosa, AL
The very first time I used the pump and boot for two hours, I was surprised that the swelling in my foot and ankle went down completely. I could see my ankle bone for the 1st time in months. The pain was gone. Betty Alexander
Kennewick, WA
VITAL WRAP SYSTEM 00002 TECHNICAL SPECIFICATIONS:
Size (approximately)
8”diameter x 13.5”H (20.3cm x 34.3cm)
Weight (dry)
5 lbs. (2.27 kg)
Fluid Tether
6 ft. (1.8m)
CONTROL SYSTEM
Type
Manual user control
THERMAL SYSTEM
Range
40°F to 105°F (4.4°C to 40.6°C)
Contrast Therapy Transition Time
1 minute typical from extremes in temperature range
Operating Period
2-6 hours typical continuous use
Thermal Cutout
47°C
CIRCULATING SYSTEM
Reservoir Capacity
1.1 gallons (4.1 liters)
Reservoir Fluid
Ice water
Flow Rate
(through VitalWrap) 5.5 gph (21 lph)
Maximum Pressure
18 psi
ELECTRICAL SYSTEM
Voltage
100, 120Vac, 50/60Hz, or 220-240Vac, 50Hz
Max Power
300W
nternally fused
System and pump
Leakage Current
Under 300μA
REGULATORY
Classification
Class I Equipment
Type of Equipment
Type BF
REGULATORY APPROVALS
Compliance
UL2601-1: Standard for Medical Equipment Part 1: General Requirements for Safety.
CAN/CSA-C22.2 no. 601.1-M90: Medical Electrical Equipment Part 1: General Requirements for Medical Electrical Equipment.
IEC 60601-1: Part 1: General Requirements for Safety.
View My Cart
